A Model and Experimental Evaluation of RO-PRO Low Energy Desalination

Thumbnail Image

Authors

Prante, Jeri L.

Issue Date

2013

Type

Thesis

Language

Keywords

Desalination , Membranes , Pressure Retarded Osmosis , Reverse Osmosis , Salinity Gradient

Research Projects

Organizational Units

Journal Issue

Alternative Title

Abstract

Reverse osmosis (RO) is currently the most energy efficient desalination technology; however, it requires a great deal of energy to create the high pressures necessary to desalinate seawater. An opposite process of RO, called pressure retarded osmosis (PRO), utilizes a salinity gradient between two solutions of different concentrations to produce pressure, and hence, energy. During this investigation, PRO was evaluated in conjunction with RO, in a system called RO-PRO desalination, to reduce the energy requirement of seawater RO desalination. The specific energy consumption for RO-PRO was modeled using RO conditions at the thermodynamic restriction and a newly developed module-based PRO model. Using a well-characterized CTA membrane, the minimum net specific energy consumption of the system was found to be approximately 40% lower than state-of-the-art seawater RO. A sensitivity analysis was performed to determine the effects of membrane characteristics on the specific energy production of the PRO process in the RO-PRO system. The sensitivity analysis showed that the minimum specific energy consumption using virtual membranes was approximately 1.0 kWh per m<super>3</super> of RO permeate at 50% RO recovery and that a maximum power density of approximately 10 W/m<super>2</super> could be achieved. The experimental power densities for the RO-PRO system ranged from 1.8 to 3.0 W/m<super>2</super>. This is higher than previous river-to-sea PRO pilot systems (1.5 W/m<super>2</super>) and approaches the goal of 5 W/m<super>2</super> that would make PRO an economically feasible technology. In addition, this is the first known system to utilize energy from a volume of water transferred from atmospheric pressure to elevated pressure across a semi-permeable membrane to pre-pressurize RO feed water. In this way, RO-PRO is a feasible future low energy desalination system that should be further investigated in order to improve efficiency and PRO membrane performance.

Description

Citation

Publisher

License

In Copyright(All Rights Reserved)

Journal

Volume

Issue

PubMed ID

DOI

ISSN

EISSN